Changshu Junze Precision Electronic Technology Co., Ltd.
Contact: Manager Liu
Mobile phone: 151-0622-0855
TEL: 0512-53730383
E-mail: zhangyangdianjiao@163.com
Website: http://www.efdps.cn
Address: Building 12, No. 68, Lianfeng Road, Changshu City, Jiangsu Province
The glue application error is usually caused by Cao. After the first debugging, the second time, the glue application error is caused by improper Cao. This is Zui a common problem. What if the error problem is solved? In fact, there are many ways, because the error range can only be changed by changing the way Cao works.
The glue application range of the dispensing needle cylinder is relatively small. Since the dispensing needle cylinder is used for small flow products, the application is not very high-precision products, or the dispensing is manually controlled, the glue application error is relatively small, and the manual control is flexible, so it can be achieved. The error range is generally applied to high-precision products, and the effect and result of manual dispensing are uneven, Cause problems.
The function of the syringe connector is to connect the dispensing needle syringe with the controller, which can play the role of air pressure transmission. It also has tightness. It can carry out product gluing requirements according to the dispensing requirements, carry out dispensing needle, and then carry out product gluing. Cao work according to the product requirements can meet the technical core requirements of production, so as to reduce the occurrence of gluing errors. This is our production mode, It is also a method to reduce errors. The syringe connector plays a great role. It can contact the product to apply glue and then dispensing, and the dispensing needle syringe is controlled by the syringe connector.