Changshu Junze Precision Electronic Technology Co., Ltd.
Contact: Manager Liu
Mobile phone: 151-0622-0855
TEL: 0512-53730383
E-mail: zhangyangdianjiao@163.com
Website: http://www.efdps.cn
Address: Building 12, No. 68, Lianfeng Road, Changshu City, Jiangsu Province
Dispensing nozzle valve is one of the special tools for automatic Dispensing nozzle machine and glue filling machine It is very important to select appropriate glue filling accessories, which can prevent the inconvenience of using liquid and paste glue.
Compound control rubber valve
Influence factors of working pressure and time on Viscose
Reduce and lower the working gas pressure, and change the glue discharge time or needle size of the glue filling machine too small, which can reduce and reduce the glue discharge
2. Pay attention to the influence of air pressure, glue delivery time range and needle size on sealing glue in different working hours. These are the factors affecting the glue delivery volume. You can adjust these parameters to ensure whether the Dispensing nozzleaccuracy meets the standard as scheduled.
3. If the amount of glue is too thick or thicker, such as paste and grease, you must use greater working pressure, longer glue delivery time, or larger needle tube.
Compound thimble Dispensing nozzle valve
4. Increase the working gas pressure, increase the glue outlet time of the glue filling machine or increase the needle size to increase the glue outlet of the sealing glue.
5. For thinner and thinner liquids, such as cyanoacrylate adhesive or paint thinner, the working pressure shall be reduced, the cutting time shall be reduced, and a small glue needle shall be used.
6. Dispensing nozzleHigh working pressure or reduction of time cycle time will accelerate the speed of glue filling machine and increase the production capacity;
7. Reduce the working pressure, lift and lift the glue time cycle, and the amount of glue will also increase with the increase of time;