Changshu Junze Precision Electronic Technology Co., Ltd.
Contact: Manager Liu
Mobile phone: 151-0622-0855
TEL: 0512-53730383
E-mail: zhangyangdianjiao@163.com
Website: http://www.efdps.cn
Address: Building 12, No. 68, Lianfeng Road, Changshu City, Jiangsu Province
Selection principle of glue for automatic dispensing machine
1.Fluid
Single component glue is used for general fluid, double liquid glue is used for double liquid Dispensing nozzle machine, hot melt glue is used for hot melt glue Dispensing nozzle valve, shadowless glue is used for specified needle barrel gluing, viscosity and bulk density of glue, setting time of fluid and effect of fluid.
2. Gluing process
General gluing application: half gluing machine (for example, manual Cao vertical), precise positioning and line drawing adopts desktop all-in-one machine, three-axis, arc drawing and other machines with automation technology. I think the automation technology function of glue belongs to the attached function. Although the amount of glue is large, it has the effect of Cao vertical fluid. Don't rely on the automation of manipulator to maintain the precision of gluing and the gluing amount of each commodity.
3. Work efficiency and bad environment
There are few commodities, Dispensing nozzledo not pursue perfection, beauty and efficiency, and use manual glue gun; In outdoor work, glue gun shall be used, and equipment with automatic technology shall be used if it is required to conduct accurate Cao vertical confrontation, and equipment with automatic technology shall be used if it is required to apply glue.
4. Cost
Dispensing nozzleThere are various gluing plans. Not all gluing must be applied with equipment, nor all automatic technology gluing must be added to the glue. Considering the cost, if a certain type of fluid must use too expensive equipment, it can be considered to replace the fluid.Dispensing nozzle If the glue price of additional automatic technology is too high, Can consider moving goods instead of gluing head.