Changshu Junze Precision Electronic Technology Co., Ltd.
Contact: Manager Liu
Mobile phone: 151-0622-0855
TEL: 0512-53730383
E-mail: zhangyangdianjiao@163.com
Website: http://www.efdps.cn
Address: Building 12, No. 68, Lianfeng Road, Changshu City, Jiangsu Province
Dispensing syringe has five parameters
1、 Curing temperature curve of dispensing syringe
For the curing of the glue used in the dispensing syringe, the general manufacturer has given the temperature curve. In practice, higher temperature shall be used for curing as much as possible to make the glue have enough strength after curing.
2、 Distance between dispensing syringe and working face
Different dispensers use different dispensing syringes, and some dispensing syringes have a certain degree of stop. Before each work, calibrate the distance between the dispensing syringe and the working surface, that is, calibrate the Z-axis height.
3、 Dispensing syringe bubble
The glue must not have bubbles. A small bubble will cause many products without glue; Every time the rubber hose is replaced midway, the air at the connection shall be drained to prevent the occurrence of air strike.
4、 Dispensing pressure of dispensing syringe
The dispensing equipment provides a certain pressure for the needle tube (glue gun) to ensure glue supply. The pressure determines the glue supply amount and the glue flow rate. Too much pressure is easy to cause glue overflow and too much glue; If the pressure is too small, intermittent dispensing and leakage will occur, resulting in product defects. The pressure shall be selected according to the glue property and working environment temperature. High ambient temperature will make the viscosity of glue smaller and the fluidity better. At this time, it is necessary to lower the pressure value, and vice versa.
5、 Viscosity of dispensing syringe glue
The viscosity of glue directly affects the quality of dispensing syringe. If the viscosity is large, the glue point will become smaller, even during wire drawing; If the viscosity is small, the glue point will become larger, and then the product may be infiltrated. During dispensing, select reasonable pressure and dispensing speed for glue with different viscosity.
Dispensing syringe application: Dispensing syringe is used in SMT dispensing industry, and there are many kinds of dispensing cartridges, so you need to consider the appropriate varieties when selecting. It is widely used in LED, semiconductor manufacturing, medicine and other industries.