Changshu Junze Precision Electronic Technology Co., Ltd.
Contact: Manager Liu
Mobile phone: 151-0622-0855
TEL: 0512-53730383
E-mail: zhangyangdianjiao@163.com
Website: http://www.efdps.cn
Address: Building 12, No. 68, Lianfeng Road, Changshu City, Jiangsu Province
Is shadowless glue dispensing and glue breaking normal?
Crcbond UV glue
In fact, many customers will encounter the problem of glue breaking in shadowless glue dispensing, the dispensing needle which is not a rare dispensing problem. Is there any way to solve the problem of glue breaking in shadowless glue dispensing? Crcbond will give you a brief introduction.
1. Solve the glue problem.
If there are bubbles or particles in the glue, this is the most common case of glue breaking.
2. Dispensing syringe problem.
UV glue cannot be stored in a transparent syringe. The glue loading of the transparent syringe can easily lead to the failure of UV glue. In order to avoid hard blocks caused by the curing of UV glue under ordinary lighting, it is recommended to use a black syringe for glue loading.
3. Dispensing controller problem,the dispensing needle.
The dispensing controller will also break the glue due to its own performance or abnormal operation in operation.
4. Dispensing pressure cylinder problem.
If there is air in the pressure cylinder, the poured UV glue will produce bubbles after a certain time, and the dispensing needle cylinder will cause unstable glue output, that is, we often say glue breaking.
Therefore, there is also a way to solve the problem of UV glue dispensing and glue breaking. First, we must find the cause of glue breaking in order to accurately and quickly solve this thorny problem.