What does dispensing debugging mean?

Which aspect does Dispensing nozzle debugging refer to? A new dispensing machine needs to be debugged in many aspects, such as speed, glue quantity, track, air pressure, position, etc. These are parameters that need to be debugged. The use requirements and glue types of each industry are different, and the adjustment parameters will be different, but the overall method is the same.

The dispensing machine is applied to a certain industry for Dispensing nozzle and debugging for the first time. The first step is to fix the product fixture, place the product, and get the glue of what width from the factory. The second step is to select the Dispensing nozzle, and then start point-to-point, set the point according to the product track. The third step is that the test track is no problem, adjust the glue outlet pressure, and start testing and gluing, Slowly adjust the mechanical dispensing speed. The fourth step is to adjust the machine parameters according to the commissioning results. The whole dispensing commissioning step has been completed and the machine production method is used.

UV glue dispensing is a popular application glue of our company. There are several machines specially used for UV glue dispensing. The original desktop automatic dispensing machine is equipped with UV lamp. After dispensing, the products are directly irradiated with UV lamp to accelerate UV glue solidification, making production more convenient without secondary processing. It is a very convenient dispensing processing method. Manual dispensing also requires secondary UV lamp irradiation, Increase the probability of defective products, which is not conducive to production.

Dispensing debugging also includes detail debugging. Different glues are used, and some debugging methods will change. Although UV dispensing and anaerobic dispensing are roughly the same, there is a gap in details. Anaerobic Dispensing nozzle has low viscosity, and after fluidity, the air pressure control should be more accurate. Then, the needle selection error should not be too large, resulting in insufficient accuracy of anaerobic dispensing, There will be deviation in the overall dispensing. Why do some anaerobic Dispensing nozzleneed to use anaerobic glue screw dispensing valve as the controller, with screw suction to control the glue output.

Working principle of screw valve: use the motor screw mode to transport and suck back the glue, turn the glue forward and reverse the suction. The control accuracy is very high, which has better effect and fruit than the ordinary dispensing valve, but the price is also very beautiful. The price of an anaerobic glue screw dispensing valve is about 40000 yuan, which is the price of single liquid screw valve, and the price of double liquid is about 80000 yuan, One valve replaces many dispensing accessories, and the effect and result are replaced well.